Desoldering braid (wick) is pre-fluxed copper braid that is used to remove solder, which allows components to be replaced and excess solder (e.g. bridging) to be removed. The soldering iron is applied to the wick as it sits on the solder joint, and when both are brought up to the solder's melting point, the flux is activated and, through capilary action from the braided design, solder is drawn up the wick. Techspray wick has been a mainstay at PCB rework, repair and prototyping stations for over 30-years.
Available in static dissipative bobbins for static sensitive environments, and in two different flux types and unfluxed:
All Techspray desoldering braids are effective solder removers, and effective on lead and lead-free solders, is compliant with RoHS, and does not contain SVHC as defined by REACH.
Specifications: Meets or Exceeds MIL-F-14256; NASA NHB 5300, 4 (34-1); NASA NPC 200-4; NASA SP5002; 1821:HP 8690-0588; 1823: HP 8690-0577; IPC Standard-J-STD-004
Got a question? If so, contact us. We're here to help you.